Outdoor installations are the most vulnerable and rain is the most common culprit. However, due to the tropical climate of Florida, high humidity can also cause moisture buildup and make it harder for any water trapped in a receptacle box to evaporate. Start your search by inspecting the receptacle box. Be sure to turn off the breaker before opening the box containing the receptacle.
The box must be dry before you attempt to reset the GFCI. It is possible to speed up this drying process using a simple tool such as blow dryer, but that part is best left to a professional.
If the installation is outdoors or located in high humidity areas, such as the bathroom or kitchen, make sure the box is weatherproof and locked even when the receptor is in use. The presence of moisture can expose you to the risk of accidental electric shock.
Circuit overload occurs when more amperage flows through an electric wire or circuit than it can handle. This may happen if you connect malfunctioning or defective appliances.
Loose, corroded wires or connections may also be to blame. Once the GFCI outlet senses an overload, it trips or "breaks" the circuit. If the problem keeps reoccurring, you may need a new dedicated circuit and outlet that can handle the amperage required by the appliances.
If your GFCI outlet trips consistently, it could be an electric fault resulting from faulty structural wiring. Unfortunately, some equipment may not be built to the same standards as the prototype that passed testing.
Now that more receptacles are required to have GFCI protection, equipment issues may be coming to light. Best practice is to test GFCIs monthly and replace them every 5 years. GFCI devices trip for several reasons. The following best practices can help confirm proper operation and reduce nuisance tripping. Proper application and maintenance of these devices is essential for personnel safety and smooth business operations.
What is GFCI protection? There are too many appliances being protected by the GFCI. The circuit is too long for the equipment being protected by the GFCI. The GFCI was improperly wired by an electrician. The area is too wet. An appliance may have manufacturing defects. After all, GFCI receptacles are meant to prevent electrical ground faults by disconnecting any electricity that could flow through the outlet. No matter how small or large the electrical current, ground fault circuit interrupters are designed to quickly disconnect all power leading to the outlet.
This is why it is very important to check your GFCI outlets to be sure that they are working properly. GFCI outlets are commonly used in wet or damp areas, such as kitchens, bathrooms, pool houses, and other outdoor areas.
Article If your GFCI outlet is continually tripping, it could probably benefit from some further investigation. Electrical trips, also known as ground faults, can occur for the following reasons:. You should try to look for what is causing the leak in the electrical current. If your insulation is worn out, old, or damaged, it could cause your GFCI to trip.
0コメント